Email:sales03@tzyuno.com Taizhou Huangyan YUNO Mould Factory

Taizhou Huangyan YUNO Mould Factory

Product Categories
Contact Us

Contact:Mrs. Young yang 
Mobile: 0086-18267666869
Tel: 0086-576-84055252
E-mail: sales03@tzyuno.com     18267666869@163.com   
Add: NO.28 Zhuling Northindustry , Huangyan, Taizhou city ,Zhejiang,China
Fax: 0086-576-84111565

Hot Runner Preform Mould Automatic Circulation Capability

Hot runner mold design after the need to put into the injection molding machine production, the choice of injection molding machine is also very important. All the automatic circulation capacity of the injection molding machine should be applied to the hot runner system. In the choice of injection molding machine with the following factors need to consider:

(1) hot runner mold due to the increase in the hot runner, more than a block flow path board, so the corresponding increase in the thickness of the mold, select the injection molding machine to pay attention to the installation height of the injection molding machine. The following are the same as the "

(2) injection molding machine injection volume measurement, to take into account the large volume of flow in the plastic compression. The following are the same as the "

(3) for the hot runner mold depreciation, to promote continuous operation of the injection molding machine, with multi-level start to reduce the bad. The following are the same as the "

Many of the equipment used to ensure the automatic operation of the mold, the preferred robot or simple and controllable manipulator, such as:

(1) the product needs to be placed in the mold, label or sheet to the mold. The following are the same as the "

(2) Remove the plastic parts or speed them out. The following are the same as the "

(3) control the movement of plastic parts and reduce the start-up time accessories. The following are the same as the "

(4) before starting the injection molding machine to heat the mold. The following are the same as the "

(5) to reduce the time on the mold, reducing the cooling water pipes, gas, circuit and hot runner temperature control box connection time.


Copyright © Taizhou Huangyan YUNO Mould Factory
QR Code